Hydrapanel

Fresh designs for modern interiors — walls and ceilings. Modern decors and woodgrains, with vinyl-finish panels coming soon.

Real Touch tile patterns come pre-finished on full sheets, and the decor range brings woodgrain, concrete and textile finishes to the same waterproof, fire-rated panel system. Hydrawall and Hydrapanel is currently stocked in a limited range of decors and panel sizes. Available options are listed in our Specification guide. * Custom decors and designs can be manufactured to order. Designer patterns can be selected from the Monco High Pressure Laminate collection.* This is a designer service. Please allow 12-14 weeks from order confirmation for delivery. Minimum order quantities apply.

A rigid, safe and easy-to-use lining solution for renovations and new builds. Install with or without trims, direct to framing or to existing wall linings — butt joined and sealed.

Timber framing: studs at maximum 600mm centres for 1200-wide sheets and 450mm centres for 900-wide sheets. Ceiling battens require minimum 400mm spacing. Support surfaces must be straight, flush, and have moisture content below 18%.

Concrete and masonry: battens spaced at 600mm centres horizontally and vertically (adjusted for panel width). All timber requires damp-proof courses between concrete surfaces.

Apply continuous 5mm × 5mm adhesive beads to framing, clean surfaces with solvent cleaner beforehand, press sheets firmly with 10mm packers, and allow 24-hour cure time before proceeding with additional work.

High Pressure Laminate surface — durable and easy to care for.

Hydrapanel linings are water and moisture resistant panels; however, the sheets must be installed and maintained to resist water penetration. Care must be given to joints and penetrations, and these must be maintained to ensure that no water can penetrate to the framing.

Hydrawood linings are finished in High Pressure Laminate, so cleaning should be with non-abrasive cloths and cleaners.

Storage and handling: long term storage of the sheets must be under cover on evenly spaced bearers (600mm max) to keep them flat and dry. Outside storage requires panels to be covered with a breathable waterproof material that allows air to circulate around the panel stack. Panels must be lifted, not dragged, off the stack.

Hydrawood Flooring Systems Limited warrants the product will be free of defects due to factory manufacturing and, subject to the conditions set out in the warranty terms, will be resistant to delaminating, rotting, cracking and termite damage for a period of 15 years from the date of purchase.

This warranty applies to the first purchaser of the product and is not transferable. Conditions apply.